NewLook's NanoSet Protector™ is a revolutionary polished concrete sealer and finishing conditioner formulated to enhance and condition architectural and commercial polished concrete floors.
NanoSet Protector is used in conjunction with the NanoSet™ Concrete Polishing System as it is applied to polished concrete after the grinding and coloring process. It introduces additional nano silica to the substrate, along with a thin, yet highly durable clear polymer layer that provides lasting protection to the polished concrete floor. It also helps "bring out" the color of integral pigmented, stained or dyed concrete, creating a slight "wet look" that compliments exposed aggregate.
The polymer-based concrete sealer formula provides extra protection against accidental staining from spills. It is particularly useful against mild acids that might be encountered in environments where food is handled or served. It can be easily re-applied to polished concrete floors for long-term protection.
NanoSet Protector Technology
The NanoSet Concrete Polishing System utilizes a proprietary and green manufacturing process that leverages advanced, inert nano-technology to deliver sustainable and durable results. The concentrated dispersion of amorphous, nano-sized silica particles offer extensive chemical reaction-sites that penetrate deeply and start reacting quickly and more efficiently upon contact, forming calcium silica hydrate (CSH), strengthening the concrete matrix and increasing its stain resistance.
NanoSet Protector is Perfect For:
- Architectural polished concrete floors
- Commercial polished concrete floors
- Industrial facilities, e.g. polished concrete warehouse floors
- Basement and kitchen floors
- Grocery or big box stores.
- All polished concrete floors
Packaging: 32 oz. quart, 1, 5, 55 gallon and 275 gallon tote containers
Coverage is approximately 1,500 to 2,000 square feet per diluted gallon. Dilute 1 part NanoSet Protector concentrate with 1 part potable water.
Complete all floor preparation including densifying, dying, and concrete polishing (grinding) before applying NanoSet Protector. Clean the polished concrete floor to remove dust and debris. The polished concrete floor surface should be completely clean and dry before installing NanoSet Protector concrete sealer.
Apply a light mist of NanoSet Protector concrete sealer from a pump sprayer. Using a damp micro fiber or flat cotton pad applicator, spread the concrete sealer in a thin film coating using a “figure 8” motion to reduce streaking and prevent puddling on the polished concrete floor. A second coat of concrete sealer should be applied after the first is tack-free. Work leaving a wet edge and work in areas bordered by joints or natural breaks. High speed burnishing using fiber pad (red or black) or hogs hair pad will further enhance the polished concrete floors finished surface.
Important Tags: nano silica, concrete sealer, sealer, polished concrete, polished concrete floors, polished concrete floor, how to polish concrete, concrete sealing, concrete polishing, nanoset protector.